How Much is a 16×7 Garage Door Installed

A 16×7 garage door, the standard size for a two-car garage, typically costs somewhere in the low-to-mid thousands installed, with the final number driven mainly by material, insulation, and opener choice. Steel doors sit at the lower end of that range, wood and heavily customized doors sit at the higher end, and installation labor usually adds a smaller but meaningful piece on top of the door price itself. 

Getting an accurate quote means measuring your actual opening first, since “16×7” describes the door, not necessarily your rough opening, and older homes in particular can have openings that drift slightly from the standard over time, sometimes only discovered during a garage door repair visit. 

Key Takeaways

• 16×7 is the standard size for a two-car garage door: 16 feet wide, 7 feet tall.
• Material is the single biggest cost driver: steel is most affordable, wood is the most expensive, aluminum and fiberglass fall in between.
• Insulation adds cost upfront but can reduce energy bills, especially for garages attached to living space.
• Opener choice (chain, belt, or screw drive, plus smart features) is a separate cost from the door itself.
• Always get your opening measured before ordering. Older homes sometimes have openings that vary slightly from the “standard” 16×7.
• Labor costs vary more than most homeowners expect, largely based on access, removal, and whether any framing repair is needed.

16×7 Garage Door Cost by Material

Material	Relative Cost Tier	Maintenance Level	Typical Lifespan	Best For
Steel	Lowest	Low	15 to 30 years	Most homeowners, budget-friendly durability
Aluminum	Low to moderate	Low	20 to 30 years	Coastal or humid climates, rust resistance
Fiberglass	Moderate	Low to moderate	15 to 25 years	Wood look without wood upkeep
Wood	Highest	High	10 to 20 years (with upkeep)	Curb appeal, custom styling

Insulation and opener choice sit on top of these material tiers as separate cost additions, not built into the base price above.

What a 16×7 Garage Door Installed Actually Includes

What’s Included in a Typical 16×7 Installation Quote

A full installation quote should include the door itself, hardware (springs, tracks, rollers, cables), removal and haul-away of the old door if applicable, and labor. Some quotes bundle in a new opener; others price it separately, so it’s worth asking which applies before comparing quotes side by side. It’s also worth asking whether the quote includes a warranty on labor specifically, since that’s often a separate line from the manufacturer’s warranty on the door itself.

What a Line-Item Quote Should Look Like

A transparent quote breaks the total into distinct pieces: the door and panel material, springs and hardware sized for a 16×7 opening, the opener if it’s included, labor for removal and installation, and any framing or electrical work. 

If a quote arrives as a single lump number with no breakdown, it’s reasonable to ask the installer to itemize it before signing anything, since that’s the easiest way to see exactly where your money is going and to compare quotes apples to apples.

What Drives the Cost of a 16×7 Garage Door

Which Material Costs the Least to Install at 16×7

• Steel: The most budget-friendly option at this size, and widely available insulated. Most homeowners replacing a standard two-car door land here.
• Aluminum: Lightweight and rust-resistant, mid-range pricing, and a reasonable choice for coastal or humid areas.
• Fiberglass: Dent- and corrosion-resistant, similar mid-range pricing to aluminum, with a look that can mimic wood grain.
• Wood: The most expensive at this size due to material cost and weight-rated hardware, plus the highest long-term upkeep of any option here.

For a full material-by-material comparison, read our Garage Door Anatomy: A Complete Guide for Homeowners, which breaks down how each material performs over time. Keep in mind that at 16 feet wide, even a modest price difference per square foot adds up quickly, since a two-car door covers roughly twice the surface area of a single-car door.

How Insulation Affects the Installed Price

Is an Insulated 16×7 Garage Door Worth the Extra Cost

Insulated doors cost more upfront but help regulate garage temperature and cut noise, which matters most if the garage sits under or beside living space. For a two-car door this size, the insulation upgrade is one of the larger optional line items on a quote, but it can pay back over time through lower energy bills, particularly in homes where the garage shares a wall with a bedroom or living room. 

Glen Burnie homeowners comparing a smaller single-car option can see specific numbers in our 9×8 Garage Door Buying Guide in Glen Burnie, MD: Everything You Need to Know.

How Opener Choice Changes the Total Cost

Which Garage Door Opener Type Costs the Most to Install

• Chain-drive: The most affordable option, strong but louder.
• Belt-drive: Quieter, mid-range cost, a common upgrade for garages attached to the home.
• Screw-drive: Fewer moving parts, similarly priced to belt-drive in most cases.

As Angi’s guide to garage door opener styles explains, the drive type matters more for noise and maintenance than it does for raw lifting power on a standard-weight door, which is worth knowing before paying extra for a “stronger” motor you may not actually need. 

If you’re considering the taller 16×8 option instead, our Guide For The Best 16×8 Garage Door covers opener requirements for that added height.

Labor and Installation Factors

What Makes 16×7 Installation Labor Cost More

• Removing and hauling away an old door, which adds time and disposal fees in some areas.
• Structural framing repairs if the opening isn’t standard, which can add a full extra day to the job.
• Electrical work for a new opener circuit, if one isn’t already in place near the garage ceiling.
• Difficult access, such as detached garages or tight side clearance, that adds time to every step of the install.
• Multiple trips if the initial measurement turns out to be wrong, which is exactly why an accurate first measurement matters so much for keeping labor costs predictable.

Family Handyman’s guide to installing garage door openers covers many of the same labor variables that apply to a full door-and-opener install, not just the opener alone, and it’s a useful reference for understanding what a fair labor quote should account for.

How Local Market Conditions Affect the Price

Why the Same Door Can Cost Different Amounts From Different Installers

Pricing varies by region based on labor rates, permitting requirements, and how much competition exists among local installers. It’s not unusual for two companies quoting the identical door and opener combination to land noticeably apart on price once labor and warranty terms are factored in, which is exactly why getting more than one quote matters. 

If a single-car garage is actually what you’re sizing, our Single Garage Door Width Guide: Find the Right Fit for Your Home breaks down that side of the decision.

Common Add-Ons That Raise the Final Price

Which Upgrades Add the Most to a 16×7 Installed Quote

• Decorative windows or hardware: Adds a noticeable amount to steel and aluminum doors in particular, since these materials come standard without them.
• Smart opener upgrades: App control, camera integration, and battery backup all add cost beyond a basic chain-drive opener.
• Extra-heavy-duty springs: Sometimes needed for insulated or wood doors at this width, since the added weight requires hardware rated beyond the standard specification.
• New wall control panel: A minor cost, but one that’s sometimes overlooked in an initial estimate and added later.

None of these are required for a functional 16×7 door, but they’re worth budgeting for separately if you know going in that you want them, rather than being surprised by them appearing on a final invoice. 

Height is worth confirming too, since it can affect hardware and clearance, and our guide What’s the Standard Garage Door Height covers that side of the decision.

How to Get an Accurate 16×7 Quote

1. Measure your actual opening width and height; don’t assume it matches the standard 16×7.
2. Decide on material and insulation level before requesting quotes, so you’re comparing apples to apples.
3. Ask whether the opener is included or priced separately.
4. Ask about warranty coverage on both the door and the installation labor.
5. Get at least two quotes from licensed, insured local installers, and ask each one to itemize material, labor, and any add-ons separately.

Getting the size right matters just as much as getting the price right, and our guide on Avoid Costly Mistakes: What’s the Best Garage Door Width covers the sizing side of that equation.

What to Do With This Cost Information

Now that you know what drives the price of a 16×7 garage door, the next step is getting real numbers for your specific garage rather than relying on general ranges. A measurement takes only a few minutes, and it’s the only way to catch the framing or access issues that turn a straightforward estimate into a surprise.

All About Doors provides clear, itemized quotes on every 16×7 installation, so you know exactly what you’re paying for before work begins. Our licensed technicians measure your actual opening on-site and account for material, hardware, and labor separately in every quote we write. We also offer financing options for homeowners who want to spread the cost over time. Contact us or give us a call to schedule a measurement today.

Frequently Asked Questions